Presentation Folders 14PT + Metallic Foil Finish
| Paper Type | 14PT Gloss C2S Stock |
||
| Coating | Metallic Foil Finish |
||
| Color | Full color CMYK: 1 Sided (4/0), 2 Sided (4/4) |
||
| Quantities | 100- 500 |
||
| Sizes |
|
||
| Finishing | Gold Foil, Trim, Diecut, Fold and glue and box |
||
| File Type | Print Ready PDF file |
||
| Special Instructions | Please provide area that needs metallic Foil as a separate PDF, that is 100K Black only. Please also
insure that there is no artwork under the foil section. |
Step 1
Ensure the file matches the product's required dimensions. Ensure that the artwork is created in CMYK 300 dpi with 1/16 inch bleeds on all sides.
Step 2
Separate artwork into two files: one is for foil lamination, for which the artwork's color should be set to 100% black. Another file should be in the CMYK color space for artwork that is not foil printed.
Step 3
Export all files into PDF format with bleeds.
For best results, we strongly recommend you ensure the following to avoid delays and/or unexpected print results.
- Supply fonts larger than 8pt
- Use sans serif fonts
- Please keep foil design away from creases, folds and edges
- Avoid having artwork underneath the foil areas (i.e. using a mask instead)
- Avoid areas of heavy foil coverage with small/fine (non-foil) text or linework knocked out, as there is a tendency for these to fill in.
- CAUTION: Our foil machine manufacturer does not recommend extending the foil design to the trimmed edge of the card, as there would be a high possibility of the foil peeling off along the trimmed edges. There should be at least a 5mm foil-free area around the edges. If you supply foil files with full bleed, please note our automation will automatically apply a 5 mm gap (from the trim edge) on your foil files to prevent the risks of the trimmed edges lifting/peeling. The non-foiled gap area may be visible along the edges as a result. It is best to avoid full bleed on your foil files for the above reasons.
Please submit two PDF files:
- Regular full color artwork
- Metallic Foil template indicating the area of the Metallic Foil
On template file, indicate area of Metallic Foil by using 100% K. Non Foil areas should be white. For best results, ensure this file is vector.
If ordering a 4/4 job with Metallic Foil on only one side, please ensure that page 1 of your artwork is the Foil side
Enhance your product with our customizable foil coverage options. Foil coverage refers to the percentage of your product's surface area adorned with a captivating metallic finish. Choose from three options: 1-25%, 26-40%, and 41-75%. Select the coverage that suits your style, whether you prefer a subtle touch or a bold statement. Elevate your product with a touch of opulence and radiance by opting for the perfect foil coverage.
Teter One
Guest User
Tester Two
Guest user
Tester One
Guest user