Presentation Folders 14PT + Metallic Foil Finish
Paper Type | 14PT Gloss C2S Stock |
||
Coating | Metallic Foil Finish |
||
Color | Full color CMYK: 1 Sided (4/0), 2 Sided (4/4) |
||
Quantities | 100- 500 |
||
Sizes |
|
||
Finishing | Gold Foil, Trim, Diecut, Fold and glue and box |
||
File Type | Print Ready PDF file |
||
Special Instructions | Please provide area that needs metallic Foil as a separate PDF, that is 100K Black only. Please also
insure that there is no artwork under the foil section. |
Step 1
Ensure the file matches the product's required dimensions. Ensure that the artwork is created in CMYK 300 dpi with 1/16 inch bleeds on all sides.
Step 2
Separate artwork into two files: one is for foil lamination, for which the artwork's color should be set to 100% black. Another file should be in the CMYK color space for artwork that is not foil printed.
Step 3
Export all files into PDF format with bleeds.
For best results, we strongly recommend you ensure the following to avoid delays and/or unexpected print results.
- Supply fonts larger than 8pt
- Use sans serif fonts
- Please keep foil design away from creases, folds and edges
- Avoid having artwork underneath the foil areas (i.e. using a mask instead)
- Avoid areas of heavy foil coverage with small/fine (non-foil) text or linework knocked out, as there is a tendency for these to fill in.
- CAUTION: Our foil machine manufacturer does not recommend extending the foil design to the trimmed edge of the card, as there would be a high possibility of the foil peeling off along the trimmed edges. There should be at least a 5mm foil-free area around the edges. If you supply foil files with full bleed, please note our automation will automatically apply a 5 mm gap (from the trim edge) on your foil files to prevent the risks of the trimmed edges lifting/peeling. The non-foiled gap area may be visible along the edges as a result. It is best to avoid full bleed on your foil files for the above reasons.
Please submit two PDF files:
- Regular full color artwork
- Metallic Foil template indicating the area of the Metallic Foil
On template file, indicate area of Metallic Foil by using 100% K. Non Foil areas should be white. For best results, ensure this file is vector.
If ordering a 4/4 job with Metallic Foil on only one side, please ensure that page 1 of your artwork is the Foil side
Enhance your product with our customizable foil coverage options. Foil coverage refers to the percentage of your product's surface area adorned with a captivating metallic finish. Choose from three options: 1-25%, 26-40%, and 41-75%. Select the coverage that suits your style, whether you prefer a subtle touch or a bold statement. Elevate your product with a touch of opulence and radiance by opting for the perfect foil coverage.
Tester Two
Teter One
Tester Two
Guest User
Guest User
Guest User
Guest User
Guest User
Teter One
Guest User